hd ML32i
LineArray Stick
In order to transmit a sound event from the fundamental to the overtones, conventional loudspeakers use two or three different types of transducers. This results in incoherence not only in the crossover areas, but also in the important mid-frequency-range due to the different decay times and the different diaphragm mass of the transducers types in a different “response characteristic”. Especially in the reproduction of instruments or speech in which the fundamental range is covered by the one type of transducer and the overtone range by the other type of transducer, the sound is distorted. This is where the 1-way design of the hd ML-Series shines: The full-range speakers that cover the fundamental range up to the overtone range, the arrangement as a line with its LineArray advantages and the coherence of the sound wave, without “phasing” and group delay make the playback to a listening experience in a class of its own. The continuous metal rail for M6 square nuts on the back allows any mounting of wall brackets or a tiltable tripod adapter. On the bottom there is a built-in 35mm flange. A high-quality powder coating of the aluminum profile and a finely structured design grid with backed acoustic foam ensures an unobtrusive integration into any room architecture.
Model | hd ML32i |
---|---|
Principle | cylindrical wave |
Transducers | 32x 2″ fullrange chassis |
Crossover | active at 90 Hz |
Power handling capacity (RMS/Peak) | 800 W / 1120 W |
Frequency range | 90 Hz – 20 kHz |
Sensitivity (1 W / 1 m) | 96 dB |
SPLmax | 127 dB |
Nominal dispersion angle | horizontal 100° x vertical 8° |
Nominal impedance | 8 Ohms |
Connection | clamp connection inside |
Dimensions (W x H x D) | 80 x 1958 x 78 mm |
Weight | 10 kg |
Enclosure | Powder-coated aluminium profile black Steel grille with acoustic foam Clamping terminal inside Cable insert at the back incl. 2x M6 nuts |
Options | RAL color multiple wall mount special length weather protection 100V transformer |